Vacon DPD00109 Manuel d'installation télécharger pdf (Page 15)

Keypad Remote Control Options vacon  15

Email: [email protected] • Fax 717-264-3115

Step 11. Assembling the Remote Keypad Interface (XRKMK only)

1. Insert the connector stacker into the receptacle on the remote keypad assembly (removed in Step 9) as shown

in Figure 11 below.

2. Insert the keypad interface board onto the rear of the keypad assembly, being sure to engage the connector

stacker simultaneously.

3. Fasten the keypad interface assembly with five (5) M3.5 x 10 screws along with the loop clamp provided. Limit

installation torque to 12 in-lb. maximum.

Figure 11: Assembling the Remote Keypad Interface (XRKMK Option)

1 2 ... 10 11 12 13 14 15 16 17 18

Pas de commentaire

Vacon DPD00109 Manuel d'installation Page 15